Wired Controller XE71-42/G
51
Figure 5-2 Parts of Wired Controller
Table 5.1.1 Standard Parts
Name
Panel of
wired
Tapping
screw
Screw M4×25
Soleplate of
wired
5.2 Installation Requirements
(1) Prohibit installing the wired controller at wet places.
(2) Prohibit installing the wired controller at the places with direct sunshine.
(3) Prohibit installing the wired controller at the place near high temperature
objects or water-splashing places.
(4) Select proper signal wire of wired controller: two-core signal wire (wire
diameter≥0.75mm; length<30m;suggested length is 8m).