Gree XE71-42/G

Wired Controller XE71-42/G
24
selection is finished, press “MENU/OK” button to confirm it. If select to reset
independent swing, the independent swing function of all air outlets will be
turned off.
(3) Once it has entered into the independent swing setting list page, on/off
status of independent swing function and swing mode for each air outlet
can be viewed.
NOTES!
(1) Only up&down swing is available for independent swing function.
(2) Only one air outlet at the most can be closed for the independent
swing.
(3) Turn off independent swing function can resume to original up&down
swing setting.
4.7.18 Panel Lifting Function Setting
Under on status, after entering into user function page, press “
˄
” or “
˅
” button to
select panel lifting function. Press “MENU/OK” button to enter into the panel lifting
function setting page. Press “
˄
” or “
˅
” button to control the up, down or stop for the
panel.
Press “ON/OFF” button to reset the panel. The reset window is displayed, which
indicates the reset is processing. Once the panel reset is finished, it will resume to
the main page automatically.