Wired Controller XE71-42/G
32
Error Code Error
Pc Driver current error
Pd Sensor connection protection
PE Temperature drift protection
PL Bus low-voltage protection
PH Bus high-voltage protection
PU Charging loop error
PP Input voltage error
ee Driver memory chip error
C4 ODU jumper cap error
dJ Phase-loss and anti-phase protection
oE ODU error, for specific error please see the status of ODU indicator
EL Emergency stop
LE Compressor stall protection
F6 Condenser medium pipe temperature sensor error
EH Auxiliary heating protection
Un
Communication error between grid-connected drive board and main
CJ DIP switch code error
Ud Invalid configuration information of inverter
To Next Page
Loading...
