Gree XE72-44/E - Absent Setting; I-Demand Setting

Wired Remote Controller XE72-44/E
11
3.11 Energy Saving Function Setting
2）Energy Saving Setting for Heating
function option, with "SAVE" flashing, and then press ▲ or ▼ to adjust the lower limit, after that,
press the SWING/ENTER button to activate this function.
Fig. 13 Energy Saving Function Setting
Turn on energy saving function:
1）Energy Saving Setting for Cooling
When the unit runs under the COOL or DRY mode, press FUNCTION button to select "SAVE"
Cancel energy saving function:
If energy saving function has been set, press FUNCTION button on the panel to select “SAVE”
function option. When icon flashes, if you press SWING/ENTER button without pressing ▲ or
▼ button, energy saving function will be canceled; if you press SWING/ENTER button after pressing
▲ or ▼ button, energy saving function will be activated.
When the unit runs under the HEAT mode, press FUNCTION button to select "SAVE" function
option, with "SAVE" flashing, and then press ▲ or ▼ to adjust the upper limit, after that, press
SWING/ENTER button to activate this function.
Note:
under energy saving setting mode, press “MODE” button to switch the energy saving setting for
COOL or HEAT mode.
Wi
Fi
Wi
Fi
Press “FUNCTION” button to select the
“SAVE” function option
Press “MODE” button to switch to the
Turn on the unit with the “SAVE”
function deactivated
Press “SWING/ENTER” button to
activate the “SAVE” function “SAVE” setting for heating
Press ▲ or ▼ to adjust the lower limit
Press ▲ or ▼ to adjust the upper limit
Wi
Fi
Wi
Fi
Wi
Fi
Wi
Fi