Gree XE72-44/E - WiFi Function Setting; Other Functions - Lock

Wired Remote Controller XE72-44/E
12
3.12 E-heater Setting
The setting of this function is shown as Fig.14 below:
Press FUNCTION to enter the E-heater setting interface, if the E-heater function is not activated,
and then press SWING/ENTER to turn it on.
E-heater (auxiliary electric heating function): In the Heating mode, E-heater is allowed to be
Once the wired remote controller or the remote controller enters the Heating mode, this function
will be turned on automatically.
Fig.14 E-heater Setting
Press FUNCTION in the Heating mode to enter the E-heater setting interface and then press
SWING/ENTER to cancel this function.
Wi
Fi
Wi
Fi
Wi
Fi
Press “FUNCTION” button into this function
Press “FUNCTION” button into auxiliary
electric heating function
Wi
Fi
Wi
Fi
Press “SWING/ENTER” button to
turn off this function
Press “SWING/ENTER” button to
turn on this function