Gree XE7A-24/HC

Owner’s Manual
48
Under Cooling or Dry mode, press “FUNCTION” button to select
X-fan. “ ” icon will blink. Then press “ENTER” button to turn on/off
this function.
5.13 Health Setting*
Health Function: Control the air purification module which can
purify air. This function cannot be used under Floor Heating mode.
When unit is on, press “FUNCTION” button to select Health. “ ”
icon will blink. Then press “ENTER” button to turn on/off this
function.
5.14 I-DEMAND Setting*
I-DEMAND Function: The unit will operate in the SE mode to
save energy. I-DEMAND function can be only be used under cooling
mode.
Under Cooling mode, press “FUNCTION” button to select
I-DEMAND. “ ” will blink. Then press “ENTER” button to turn on/off
this function.
NOTE
: It is only applicable to U-match unit.
5.15 Absence Setting
Absence Function: This is used to maintain indoor temperature
so that unit can realize fast heating after it is turned on. This function
can only be used under Heating mode.
Under Heating mode, press “FUNCTION” button to select
Absence. “ ” icon will blink. Then press “ENTER” button to turn
on/off this function.