Owner’s Manual
52
three months.
④ The auto clean effect will be weakened if indoor
environment humidity is low.
⑤ It is recommended to use Auto Clean function at the
outdoor ambient temperature of 10
℃
~40
℃
. Otherwise,
Auto Clean function will exit in advance, which is the
normal phenomenon.
⑥ When an indoor unit in VRF system has entered into the
Auto Clean mode, all other units in the system will
operate under the auto clean mode.
⑦ When the wired controller controls U-match unit, Auto
Clean function can only be turned on under OFF status
and timer zone do not display the remaining time of the
Auto Clean mode.
5.21 WiFi Function Setting
"GREE+" App can be used to control wired controller
XE7A-24/HC. Please scan the QR code or search "GREE+" in the
application market to download and install it. When "GREE+" App is
installed, register the account and add the device to achieve
long-distance control and LAN control of Gree smart home
appliances.
APP can only set some common functions of wired controller:
ON/OFF, mode, set temperature, FAN speed, etc.
When using the APP for the first time, please reset the WiFi
function of wired controller (reset WiFi to ex-factory setting): when
To Next Page
Loading...
