28
PASTA AND NOODLES
MACHINE SETUP:
1. Attach the Twin Gear Housing to the main body
2. Insert the Pasta Screw onto the motor drive shaft (left side as you are looking
into the body)
3. Place the Pasta Guide over the Pasta Screw, making sure the long side of
the Pasta Guide is on the left
4. Select the pasta shape desired from the two shapes available on the Pasta
Screen and fit it onto the Twin Gear Housing. (See diagram on page 16)
5. Tighten the Latching Arm Knobs snugly
6. Place a plate under Pasta Screen
Pasta
1 PACKAGE READY MIX PASTA DOUGH
1 TSP EXTRA VIRGIN OLIVE OIL
1. Prepare pasta dough according to the instructions on the package of the
pasta dough mix
2. Put a few drops of olive oil into the Feeding Chute while running the
machine
3. Feed your pasta dough into Feeding Chute
4. Collect your pasta onto a plate
Variations:
If you use carrot juice when preparing the dough you will get red pasta. Use
kale juice for green pasta and water for plain pasta.
Note: A whistling sound may occur initially, but will disappear after some dough has
been fed through the machine.
To Next Page
Loading...
