C
Connie WilliamsAug 16, 2025
What to do if the pulp discharge casing on my Green Star JUICE EXTRACTOR begins shaking?
- PPeter SantanaAug 16, 2025
Tighten the Latching Arm Knobs on your Green Star juicer.
To Next PageTo Next PageWhat to do if the pulp discharge casing on my Green Star JUICE EXTRACTOR begins shaking?
Tighten the Latching Arm Knobs on your Green Star juicer.
What to do if the pulp discharge casing doesn’t fit properly on my Green Star Juicer?
Check to see if the Twin Gears are seated properly. Give them a twist while pushing in until they lock into place on your Green Star juicer.
What to do if my Green Star Juicer stops while running?
First, ensure the Green Star juicer is correctly assembled. If the machine is overloaded, use the reverse switch to dislodge some of the ingredients. If the material is too large or hard, use the reverse switch to clear the machine. You may also need to check the fuse and replace it if necessary.
How to fix a Green Star JUICE EXTRACTOR Juicer that won't turn on?
Ensure that the power supply is active, and the plug is correctly positioned in the electrical outlet, and that the machine is switched on. Also, check the fuse and replace it if needed.
What to do if material is jammed in my Green Star JUICE EXTRACTOR Juicer?
Flip the switch to the reverse position once or twice. If it doesn’t clear, disassemble the Green Star juicer to clear any blockage.
Why is there a low amount of juice from my Green Star JUICE EXTRACTOR Juicer?
Tighten the Outlet Adjusting Knob on your Green Star juicer.
Why is the pulp from my Green Star JUICE EXTRACTOR Juicer too wet?
Tighten the Outlet Adjusting Knob on your Green Star juicer.
What to do if pulp is not being ejected from my Green Star JUICE EXTRACTOR?
Loosen the Outlet Adjusting Knob on your Green Star juicer.
Why is pulp coming out with juice from my Green Star JUICE EXTRACTOR Juicer?
Make sure the screen is in the correct position in your Green Star juicer.
How to fix noisy gears in my Green Star JUICE EXTRACTOR?
Make sure the Twin Gears are correctly aligned. Also, check to see if there is any hard material lodged in the gears. If so, disassemble the Green Star juicer, rinse, and try again.
Details on authorized service locations and contact information for the Green Star juicer.
List and diagrams of standard parts included with the Green Star GS-1000 model.
Explanation of the different screens (Fine, Coarse) and their specific applications for juicing.
Instructions on the proper usage of the plastic plunger for pushing food into the juicer.
Guidance on using the wooden plunger, including its material and interaction with the juicer's gears.
Instructions for positioning the drip tray to collect pulp and juice effectively.
Specific steps and tips for juicing wheatgrass for maximum yield and minimal foam.
Step-by-step guide on how to use the juicer to create homemade pasta.
Instructions for using the juicer to prepare breadsticks, bagels, and rice cakes (mochi).
Detailed steps for safely replacing the fuse in the Green Star juicer.
Explanation of normal operating noises and potential causes of unusual sounds.
Information about the juicer's natural flexing and wiggling during operation.
Tips and techniques for effective juicing of carrots, wheatgrass, leafy vegetables, and apples.
Detailed instructions on cleaning the juicer parts and main body after use.
General| Type | Juicer |
|---|---|
| Juice Yield | High |
| Dimensions | 12.5 x 6.5 x 18.75 inches |
| Weight | 17.2 lbs |
| Materials | Stainless Steel |
| Voltage | 220V |
| Frequency | 50 Hz |
| Material | Stainless Steel |
