3
Overview
Unity CV2GIP / CV2SVGIP is a continuously running (dMEV) extract fan,
designed to offer a simplistic approach to meet Building Regulations and
provide an energy efficient domestic ventilation solution to improve indoor
air quality in dwellings.
The concept revolves around ‘one product’, which has been designed to
be flexible in application (ceiling and wall installations) and to meet the
performance requirements of all ‘wet’ rooms within a dwelling. The Unity
CV2GIP / CV2SVGIP features new Greenwood TimerSMART
TM
and
Greenwood HumidiSMART
TM
technology (fully automatic integral delay /
over-run timer and humidity functions) which monitor the homeowners’
environment. For enabling / disabling features see section 2.8 On Site
Commissioning.
A boost speed facility is provided to increase the ventilation rate during
peak times, helping to provide a comfortable indoor environment. Either a
‘switch-live’ light switch or an alternative boost switch (not supplied)
should be wired to provide this operation (see section - 2.6 Electrical).
This product features on PCDB, part of the process will require the
Installation Checklist for dMEV products to be completed and submitted
to building control, available at www.ncm-pcdb.org.uk, along with all other
relevant paperwork.
Record sheets for commissioning information are provided; please refer to
section 4 of the User / Homeowner Guide also supplied with the product.
Packaging Includes –
Ancillary Items: 100mm round ducting or
Flat duct (110 x 54mm) or (204 x 60mm).
100mm grille & appropriate boost switch (GS2).
PFACV2 - Picture Frame Adaptor.
1.0 General Description / Physical Specification
1.1
1.1.1
1.1.2
1.1.3
1.1.4
1.1.5
1.1.6
CV2GIP
1 x Unity dMEV Unit
1 x Loose item set
1 x Installation Instructions
1 x User / Homeowner Guide
CV2SVGIP
1 x Unity dMEV Unit
1 x SELV Box
1 x Loose item set
1 x Installation Instructions
1 x User / Homeowner Guide
To Next Page
Loading...
Need help?
General
