GreenWorks PSPH40B00 - Maintenance; Cleaning, Maintenance, and Storage; Storage

MAINTENANCE
56
U$(7,+,9!:7+,"(,7,U(!7,8!4"#'79(
Your tool has been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper tool care and regular
cleaning.Your charger does not require any maintenance apart from regular cleaning.
2 7 ',+,9
Before performing any maintenance on the tool, remove the battery from the tool. Unplug the
charger before cleaning it.
After use and before storage
• After use, carefully clean the blades. After cleaning, apply a lm of light machine oil to prevent
the blades from rushing.
• Regularly clean the ventilation slots in your tool using a soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent
based cleaner.
• Make sure all switches are free of debris before and after use.
4"#'79(
When storing or transporting the chain saw, always place the protective cover over the chain saw
blade. When the tool will not be used for several months, ideally leave the battery connected to
the charger. Otherwise proceed as follows:
• Fully charge the battery.
• Remove the battery from the tool.
• Store the tool and battery in a secure and dry location. The storage temperature must always
remain in the range of 50°F to 104°F. Place the battery on a level surface. Before using the
tool after prolonged storage, fully charge the battery again.