Why GreenWorks Trimmer won't start?
If your GreenWorks Trimmer isn't starting, several factors could be the cause. Ensure the battery is correctly installed and fully charged as per the charger manual's instructions. Also, make sure to pull back on the lock-off button before turning on the On/Off switch. Finally, verify that the pole connections are properly tightened.
What to do if GreenWorks PSPH40B00 Trimmer chain is not rotating, but the motor is running?
If the motor of your GreenWorks Trimmer runs but the chain doesn't rotate, the chain tension might be too tight. Try loosening the chain. Also, inspect the guide bar and chain assembly for any damage.
Why is my GreenWorks PSPH40B00 bar and chain running hot and smoking?
If the bar and chain of your GreenWorks Trimmer are running hot and smoking, it might be due to overtightened chain tension or an empty bar and chain oil reservoir. Tension the chain appropriately and check the bar and chain oil reservoir.
General| Type | String Trimmer |
|---|---|
| Power Source | Battery |
| Voltage | 40V |
| Cutting Width | 13 inches |
| Weight | 14.8 lbs |
| Battery Included | Yes |
| Cutting Swath | 13 inches |
| Charger Included | Yes |
Technical specifications for the pole saw attachment, including voltage, chain speed, cutting length, oil capacity, type, and weight.
Technical specifications for the hedge trimmer attachment, including voltage, speed, blade length, cutting capacity, and weight.
Guidelines for maintaining a clean, well-lit, and safe work area, free from hazards and distractions.
Precautions regarding electrical shock, including avoiding grounded surfaces and wet conditions.
Advice on staying alert, using PPE, preventing unintentional starting, and proper attire.
Instructions for proper usage, maintenance, and care of the power tool to ensure safe operation.
Guidelines for safe handling, charging, and use of battery packs to prevent hazards.
Information on obtaining professional service and using identical replacement parts for safety.
Safety precautions specific to operating the pole hedge trimmer, focusing on blade safety and handling.
Safety warnings for pole saw operation, covering kickback, overhead lines, and proper cutting techniques.
Health hazard warning regarding chemicals in dust created by power tools, and precautions to reduce exposure.
Explanation of various symbols used on the product and in the manual for clarity and safety.
Definitions of signal words like DANGER, WARNING, and CAUTION to indicate risk levels.
Critical warnings regarding operating with damaged parts or modifying the product, which could lead to injury.
Instructions on how to correctly insert and remove the battery pack from the tool.
Procedure for filling the bar and chain oil reservoir for proper lubrication.
Instructions for assembling the pole saw attachment, including connecting the saw head and extension tube.
Steps to attach the saw head directly to the handle for standard reach, ensuring secure connection.
Procedure to connect the extension tube between the saw head and handle for maximum reach.
Steps to detach the saw head from the extension tube or handle, ensuring proper loosening of the collar.
Detailed steps for adjusting chain tension, including loosening the knob, removing the cover, and tightening the screw.
Instructions for attaching, detaching, and adjusting the angle of the hedge trimmer head.
Procedure to connect the trimmer head to the main handle, aligning arrows and fastening the coupler.
Steps to detach the trimmer head by loosening the cam lock and pushing the lock button.
How to pivot and lock the trimmer head into one of seven positions for optimal cutting.
Guidance on charging the battery before first use and when it fails to produce sufficient power.
Instructions for safely operating the tool's dual-switch system to turn it on and off.
Steps for preparing to cut with the pole saw, including grip, stance, and basic cutting techniques for branches.
Techniques for trimming branches and limbs, including planning cuts, angles, and safety precautions.
Tips for optimal use of the pole hedge trimmer, including cutting angles, using guidelines, and trimming schedules.
Detailed steps for charging the battery, including indicator lights and troubleshooting false defects.
Troubleshooting tips if the battery pack does not charge properly, checking power and contacts.
Instructions for wall mounting the battery charger securely using screws and anchors.
Guidelines for cleaning, maintaining, and storing the tool and charger for optimal performance.
Procedures for storing the tool and battery for extended periods, including charging and location.
Common problems and solutions for the pole hedge trimmer, such as the tool not starting.
Troubleshooting common issues with the pole saw, like hot chains or non-rotating chains.
Diagram showing the exploded view of the pole hedge trimmer components for identification and assembly reference.
Diagram showing the exploded view of the pole saw components, including the handle, extension, and saw head.
List of parts for the pole hedge trimmer, including item number, part number, description, and quantity.
List of parts for the pole saw, including item number, part number, description, and quantity.
To Next Page