EasyManua.ls Logo

GreenWorks PSPH40B00 - Troubleshooting; Pole Hedge Trimmer Troubleshooting; Pole Saw Troubleshooting

GreenWorks PSPH40B00
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5X
TROUBLESHOOTING
*#$(!)(89(!"'+::('
*'#Z$(: *#44+Z$(!U7Y4( 4#$Y"+#,
Tool will not start Battery not installed properly Check the battery installation
Battery discharged Fully charge the battery by
following the instructions in the
charger manual.
Lock-off button not actuated Pull back on the lock-off button
before engaging the On/Off
switch.
Pole connections not properly
tightened
Check the connections
*#$(!472
*'#Z$(: *#44+Z$(!U7Y4( 4#$Y"+#,
Bar and chain running hot
and smoking.
Check chain tension for
overtightened condition. Bar
and chain oil reservoir empty.
Tension chain. Refer to Chain
Tension earlier in this manual.
Check bar and chain oil reservoir.
Motor runs, but chain is not
rotating.
Chain tension too tight. Check
guide bar and chain assembly.
Check guide bar and chain for
damage.
Loosen chain. Refer to Chain
Tension earlier in this manual.
Refer to Replacing the Bar and
Chain earlier in this manual.
Inspect guide bar and chain for
damage.

Related product manuals