13. WORKING AREA
To be able to use the machine properly, the areas indicated in the picture below must be left free.
12. INSTALLATION
The machine must be installed on a surface strong enough to sustain its weight so as to prevent harmful
vibrations from impairing the good performance of the machine.
To guarantee maximum machine efficiency and safety, the surface where the machine is located must
be made of well-levelled concrete. If the surface does not meet such requirements, we advise you to
make a suitable one.
Place the machine in a room, in a suitable position to be used and to be easily connected to
- power supply network
- compressed air network
- suction plant
The location where the machine will be placed must be equipped with suitable lighting to execute work-
ing or maintenance operations.
11
GRIGGIO S.p.A.
WOODWORKING MACHINERY
To Next Page
Loading...
