GRIGGIO GF 21 - 24 Machine Is Put out of Commission

24. MACHINE IS PUT OUT OF COMMISSION
If the machine has to be put out of commission, you will have to follow the following instructions strictly
so as to guarantee people’s safety and to protect the environment around the machine.
Therefore, after disconnecting the machine it is advisable to:
- Disassemble drills and put them in a suitable container, where they will be stored and protected from
damage.
- Disassemble electrical, pneumatic and hydraulic components so that they can be re-used after an
inspection or an overhaul.
- Empty oil out of hydraulic gearcase without spilling it into the environment.
- Disassemble all metallic components in the machine and divide them into separate groups accord-
ing to material.
- Call a firm specialised in material regeneration and disposal (solid and liquid materials).
GRIGGIO S.p.A.
WOODWORKING MACHINERY
26