Grizzly G0503 User Manual

12" HORIZONTAL
RESAW BANDSAW
MODEL G0503
INSTRUCTION MANUAL

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.


Grizzly G0503 Specifications

General

Motor Power	2 HP
Table Size	20-1/4 x 27 in.
Weight	242 lbs.
Motor	2 HP, 110V/220V, Single-Phase, TEFC
Dust Port Size	4"
Blade Diameter	10"
Blade Size	10"
Arbor Size	5/8"
Max Cut at 90°	3-1/8"
Maximum Cut Depth	3-1/8" at 90°

Summary

Safety Information

General Safety Instructions

Critical safety warnings and general operating precautions for machinery.

Resaw Specific Safety

Specific safety precautions for operating the resaw.

Hydraulic System Safety

Safety guidelines related to the hydraulic system.

Circuit Requirements

220V 3-Phase Power

Electrical requirements for 220V 3-phase power.

440V 3-Phase Power

Electrical requirements for 440V 3-phase power.

Grounding and Phase Converters

Grounding procedures, phase converter use, and extension cord recommendations.

Setup Procedures

Unpacking and Inventory

Steps for unpacking the machine and checking included parts.

Hardware Identification

Guide to identify and match hardware during assembly.

Tools and Site Preparation

Required tools, materials, and site considerations for setup.

Component Assembly

Instructions for removing from crate, floor mounting, and conveyor belt installation.

System Connections

Steps for attaching hydraulics, control panel, and rollers.

Blade and Power Installation

Connecting dust collector, installing blade, and connecting power.

Test Run and Blade Tensioning

Performing test run and adjusting blade tension.

Machine Identification and Features

Key Machine Components

Identification of main parts like rollers, conveyor, dust port, and control panel.

Motor and Hydraulic Systems

Description of motor, hydraulic system components, and controls.

Control Panel Operation

Button Functions

Explanation of the function of each button on the control panel.

Machine Specifications Data Sheet

Machine Accessories

Maintenance Procedures

Cleaning and General Checks

Instructions for cleaning and routine maintenance checks.

V-Belts and Bearings

Information on V-belt condition, tension, and machine bearings.

Lubrication Schedule

Schedule and procedure for greasing machine components.

Hydraulic System Service

Steps for minor and major maintenance on the hydraulic system.

Wheel Scraper Maintenance

How to inspect and replace wheel scrapers.

Machine Service and Adjustments

Blade Tracking and Guide Alignment

Adjusting blade tracking and guide blocks for proper blade path.

Support Wheel and Elevation Gauge

Adjusting support wheel and calibrating blade elevation gauge.

Conveyor Table and Belt Tracking

Aligning conveyor table and tracking the conveyor belt.

Conveyor Belt Replacement

Instructions for replacing the conveyor belts.

V-Belt Adjustments

Procedures for V-belt tensioning and replacement.

440V Conversion Procedure

Instructions for converting the machine to 440V power.

Machine Operations

Operation Safety

Safety precautions during machine operation.

Workpiece Preparation

How to prepare workpieces for precise cuts.

Blade Height and Conveyor Controls

Adjusting blade height and operating conveyor belt.

Pressure Rollers and Resawing

Adjusting pressure rollers and performing resawing operations.

Blade Information and Care

Details on blade types, care, and common breakage causes.

Troubleshooting Common Issues

Troubleshooting Guide

Solutions for common machine problems and symptoms.

Warranty and Returns Policy

Maintenance Record Keeping

Warranty Registration Card