Figure 48.
Figure 48
Check the hydraulic fluid level daily.
Figure 48
Perform a “Minor Service” every 960 hours,
or when the filter pressure gauge (see Figure
48) nears the red.
Inspect and clean the breather cap and filler
screen every 40 hours of regular use.
The hydraulic system on this machine cre-
ates very high pressure and the hydraulic
fluid gets hot. Always stop the resaw, make
sure the pressure gauge reads 0 PSI, and
make sure the fluid cools down before ser-
vicing the hydraulic system.
Hydraulic System
Minor Service
Hydraulic Fluid
Schedule
To inspect the hydraulic fluid:
1.
2.
Troubleshooting
page 68
3.
To Next Page
Loading...
Need help?
General
