Thickness Stop
Calibration
Tools Needed Qty
To adjust the thickness stop:
1.
2.
3.
Steps 2–3 Drive Belt
Page 28
Figure 42. Thickness stop adjustment.
8jiiZg]ZVY@c^[Z
Hide7dai
IdjX]^c\
IdjX]^c\
&I]^X`Ldg`e^ZXZ
I]^X`cZhh
Hide
AdX`Cji
5.
6.
7.
4.
Note:It is important that all four adjustment
bolts are set equally. Failure to do this could
cause the cutterhead to move during use,
resulting in inconsistent planing.
4.
Figure 42
To Next Page
