Model G0899 (Mfd. Since 10/20)
-61-
SECTION 7: MAINTENANCE
Schedule
To prevent serious per-
sonal injury from shock
or accidental startup,
always disconnect power
from machine before
doing any maintenance.
Cleaning &
Protecting
Cleaning the Model G0899 is relatively easy.
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. If any
resin has built up, use a resin-dissolving cleaner
to remove it.
Protect the unpainted cast-iron table by wiping it
clean after every use—this ensures moisture from
wood dust does not remain on the bare metal
surface. Keep the table rust-free with regular
applications of products like G96
®
Gun Treatment,
SLIPIT
®
, or Boeshield
®
T-9.
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To minimize your risk of injury and maintain proper
machine operation, shut down the machine imme-
diately if you ever observe any of the items below,
and fix the problem before continuing operations:
• Loose mounting bolts/arbor nut.
• Damaged saw blade.
•
Worn or damaged wires.
•
Any other unsafe condition.
Weekly Maintenance:
• Clean table surface and miter slot grooves.
• Clean and protect cast-iron table.
• Clean rip fence.
Monthly Maintenance:
• Clean/vacuum dust buildup from inside cabi-
net and off motors.
• Check/replace belt for proper tension, dam-
age or wear (Page 76).
Every 6–12 Months:
• Lubricate trunnion slides, worm gear, bull
gear, and leadscrew (Page 62).
G5562—SLIPIT
®
1 Qt. Gel
G5563—SLIPIT
®
12 Oz. Spray
G2871—Boeshield
®
T-9 12 Oz. Spray
G2870—Boeshield
®
T-9 4 Oz. Spray
H3788—G96
®
Gun Treatment 12 Oz. Spray
H3789—G96
®
Gun Treatment 4.5 Oz. Spray
Figure 108. Recommended products for protect-
ing unpainted cast iron/steel parts on machinery.
To Next Page
Loading...
