Model G0899 (Mfd. Since 10/20)
-7-
The information contained herein is deemed accurate as of 12/9/2020 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 3
Model G0899
Main Specifications:
Main Information
Table Saw Type....................................................................................................................................... Hybrid
Maximum Blade Diameter......................................................................................................................... 10 in.
Arbor Size................................................................................................................................................. 5/8 in.
Arbor Speed...................................................................................................................................... 4000 RPM
Maximum Width of Dado...................................................................................................................... 13/16 in.
Blade Tilt Direction....................................................................................................................................... Left
Max Blade Tilt......................................................................................................................................... 45 deg.
Maximum Depth of Cut At 90 Degrees.................................................................................................. 3-1/8 in.
Maximum Depth of Cut At 45 Degrees.................................................................................................. 2-1/8 in.
Max Rip Right of Blade w/Included Fence & Rails.............................................................................. 31-1/2 in.
Max Rip Left of Blade w/Included Fence & Rails................................................................................. 11-3/8 in.
Additional Blade Information
Included Blade Information.............................................................................................................. 10 in. x 40T
Riving Knife/Spreader Thickness.......................................................................................................... 0.100 in.
Required Blade Body Thickness.............................................................................................. 0.063 - 0.094 in.
Required Blade Kerf Thickness................................................................................................ 0.102 - 0.126 in.
Rim Speed at Max Blade Diameter................................................................................................. 10,500 FPM
Table Information
Floor to Table Height........................................................................................................................... 34-1/4 in.
Table Size with Extension Wings Width.............................................................................................. 40-1/8 in.
Table Size with Extension Wings Depth.................................................................................................... 27 in.
Distance Front of Table to Center of Blade......................................................................................... 16-1/4 in.
Distance Front of Table to Blade At Maximum Cut............................................................................. 11-1/2 in.
Main Table Size Thickness.................................................................................................................... 1-1/2 in.
Fence Information
Fence Type.................................................................................... Camlock T-Shape w/High-Low Profile Face
Fence Size Length............................................................................................................................... 34-5/8 in.
Fence Size Width.................................................................................................................................. 4-5/8 in.
Fence Size Height....................................................................................................................................... 3 in.
Fence Rail Type............................................................................................... Square Steel Tubing/Angle Iron
Fence Rail Length...................................................................................................................................... 63 in.
Fence Rail Width......................................................................................................................................... 3 in.
Fence Rail Height.................................................................................................................................. 1-3/4 in.
Miter Gauge Information
Miter Gauge Slot Type.............................................................................................................................. T-Slot
Miter Gauge Slot Size Width..................................................................................................................... 3/4 in.
Miter Gauge Slot Size Height................................................................................................................... 3/8 in.
Construction
Table....................................................................................................................... Precision-Ground Cast Iron
Wings...................................................................................................................... Precision-Ground Cast Iron
Cabinet................................................................................................................................... Pre-Formed Steel
Trunnions............................................................................................................................................. Cast Iron
Fence Assembly......................................................................................................... Steel w/Aluminum Fence
Rails........................................................................................................................................................... Steel
Miter Gauge Construction.................................................................................................................... Cast Iron
Guard............................................................................................................................................. Clear Plastic
Body/Cabinet Paint Type/Finish.................................................................................................... Powder Coat
Arbor Bearings.............................................................................................. Sealed & Permanently Lubricated
Other Related Information
Number of Dust Ports....................................................................................................................................... 2
Dust Port Size.............................................................................................................................................. 4 in.
Compatible Mobile Base........................................................................................................................ T28922
To Next Page
Loading...
