G1028/G1029 Dust Collector -17-
SECTION 7: MAINTENANCE
Lubrication
Periodic maintenance will ensure safe operation,
long dust collector life, and low overall cost of
operation.
Routinely check the condition of the following
items and repair or replace as necessary:
1. Loose mounting bolts, collector body, outlet,
and support bracket mounting bolts.
2. Worn switch.
3. Worn or damaged cords and plugs.
4. Worn or damaged collection/filter bag.
5. Any other condition that could hamper the
safe operation of this machine.
IMPORTANT: Always empty the collection bag
before it becomes full. Machine efficiency is
greatly increased when the collection bag is
empty.
General
Shielded and pre-lubricated ball bearings require
no lubrication on your part for the life of the bear-
ings. Bearing life is dependent upon use. All bear-
ings are common sizes.
To Next Page
Loading...
Need help?
General
