The information contained herein is deemed accurate as of 5/25/2009 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 2Model G7944
Other Related Information
Base Length............................................................................................................................................... 18 in.
Base Width................................................................................................................................................. 11 in.
Quill Diameter........................................................................................................................................2.040 in.
Depth Stop Type...........................................................................................................................................Hub
Column Diameter.................................................................................................................................. 3.150 in.
Mobile Base..............................................................................................................................................G8683
Illumination....................................................................................................................... 110V Socket, Separat
Spindle Information
Spindle Taper.............................................................................................................................................MT#2
Spindle Travel........................................................................................................................................ 3-1/4 in.
Dist From Spindle To Column...................................................................................................................... 7 in.
Dist From Spindle To Table................................................................................................................. 31-1/2 in.
Dist From Spindle To Base........................................................................................................................ 49 in.
Table Information
Table Length........................................................................................................................................ 11-3/8 in.
Table Width.......................................................................................................................................... 11-3/8 in.
Table Thickness..................................................................................................................................... 1-1/4 in.
Floor To Table Height......................................................................................................................... 20 - 46 in.
Vertical Table Movement................................................................................................ Crank Handle Operate
Table Swing.......................................................................................................................................... 360 deg.
Table Tilt.......................................................................................................................... Left and Right 90 deg.
Table Swivel Around Center................................................................................................................. 360 deg.
Table Swivel Around Column................................................................................................................360 deg.
Maximum Movement Of Work Table..........................................................................................................14 in.
No. Of T Slots....................................................................................................................................................4
T Slot Width...............................................................................................................................................5/8 in.
T Slot Length..........................................................................................................................................3-7/8 in.
Operation Information
Swing..........................................................................................................................................................14 in.
Drilling Capacity........................................................................................................................... 3/4 in. in Steel
No Of Spindle Speeds.....................................................................................................................................12
Range Of Spindle Speeds..................140, 260, 320, 380, 480, 540, 980, 1160, 1510, 1650, 2180, 3050 RPM
Drill Chuck Type....................................................................................................................... JT33 Key Chuck
Drill Chuck Size......................................................................................................................................... 5/8 in.
Other Specifications:
Country Of Origin ................................................................................................................................................China
Warranty ............................................................................................................................................................ 1 Year
Serial Number Location ................................................................................................................Data Label on Head
Awards ...............Popular Woodworking Editor's Choice Tool Buying Guide, American Woodworker Best Buy 2001,
Woodworker's Journal Tools That Endure
Assembly Time ........................................................................................................................................... 45 minutes
Features:
Crank Handle Operated Rack and Pinion Vertical Table Movement
Cushioned Grip Quill Handles
Table Has Lock Levers and Coolant Trough
Includes Built-in Light
Four T-Slots Accommodates 1/2" Clamping Kit
Table and Base are Cast Iron
12 Speeds
3/4HP Motor
Threaded Depth Stop
1/8" - 5/8" Chuck
To Next Page
