Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
Installing/Removing
Drill Bits
Operation Safety
To install a drill bit:
1.
2.
3.
Note:Make sure small bits are not trapped
between the edges of two jaws; if they are,
reinstall the drill bit or it will not be secure
enough to use for drilling.
4.
To remove a drill bit:
1.
2.
SECTION 4: OPERATIONS
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
Wear safety glasses when
operating this machine.
Serious injury may occur if
this warning is ignored!
Switch/Lockout
To use the switch:
1. ON
2. OFF
3.
Figure
24
Figure 24.
To Next Page
Loading...
Need help?
General
