Grow GM65 - Induction Mode

8
1500ms 2000ms
3.2 Induction Mode
After setting, module begin to monitor brightness immediately. When scene change, module will
begin to read until time of image stabilization over.
After first successful reading or single reading time out, module will monitor brightness again after
some time ( changeable)
Module will cycle working as above when follow happen: module can’t find code between single
read time, then it will stop reading and jump to monitor brightness.
On induction mode, module can begin reading code by click, and it will begin to monitor brightness
when release toggle key or successfully output information.
Induction Mode
Time settlement for single read
The longest time before first successful reading. After this time, module will be into no read time.
Single Read time: 0.1~25.5 s, step-size: 0.1s;
0 means infinite time interval.
5s default
1000ms 3000ms
Default 5000ms infinite time interval