10
Sleep mode on Sleep mode off
Default: come into sleep mode after 30s free. Wake up by key. Module will restart after dropping out
3.4 Command Triggered Mode
Module begins to read when receive scan command from mainframe( bit0 of zone bit 0x0002
writes”1”) , and stop at output or read timeout.
Under command triggered mode, command for serial port trigger is 7E 00 08 01 00 02 01 AB CD;
After receiving command, model will output “ 02 00 00 01 00 33 31” and start scan.
Time settlement for single read
Read and Scan time before output. From 0.1s to 25.5s, step size 0.1s. 0 : infinite time interval;
Default 5000ms infinite time interval
To Next Page
Loading...
