Grow GM65 - Manual Mode

9
Break time settlement
After one successful output or time out for single read. Module will be into monitor after some time.
Time from 0 to 25.5 s, step-size: 0.1s; default 1.0s
No Break 500ms Default 1000ms
1500ms 2000ms
Image stabilization time
Image stabilization time : the time cost after module find scene change then waiting for the scene
stable. Time from 0s to 25.5s, step size 0.1s. Default 0.4s.
100ms Default 400ms
1000ms 2000ms
3.3 Manual Mode
Click toggle key begin to read, stop when output or release toggle key
Manual Mode
Into sleep mode after not work for a while, can be settled by following code.