Grow GM65 - Page 24

20
Base 16 is used to express length.ASCII on appendix C.
Change M
Change length of [End]-N
Scan “ Change N” code and “data edition” code to change length of [Start], max 255 characters
Base 16 is used to express length.ASCII on appendix C.
Change N
Output Start part
E.G. Output “1234567890123” of whole decode information “ 1234567890123ABC”
1. “13” =”0D” in base 16
2. Confirm opening the “setup code”, if not, find on 1.4
3. Scan” change length M”
4. Successively scan “Code ID”: “0”, “D”
5. Scan” Output Start part”
Output End Part
E.G. Output “ABC” of whole decode information “ 1234567890123ABC”
1. “3” = “03” in base 16
2. Confirm opening the “setup code”, if not, find on 1.4
3. Scan ”change length N”
4. Successively scan “Code ID”:”0”, “3”
5. Scan” Output Start part”
Output Center part
E.G.: Output “0123” of whole decode information “ 1234567890123ABC”
1. “ 10” =”0A”; “3”=”03” in base16
2. Confirm opening the “setup code”, if not, find on 1.4