Grundfos CIM 300 - Bacnet

1.6 BACnet
A Grundfos Level Control LC 2X1 can be connected to two
wastewater pumps,while a Grundfos Level Control LC 2X2 can be
connected to two submersible pumps. LC units provide status
information, as well as control and monitoring for a wastewater pit
or submersible pump via an operating panel.
1.6.1 BACnet MS/TP, CIM 300
CIM 300 is an add-on communication module that can be installed
in an LC 2XX using a 10-pin connector. This enables
communication with a PLC, SCADA system, etc.
Via the BACnet MS/TP connection, it is possible to control the
system and read status, measured values, etc.
CIM 300
1
BACnet
MS/TP
LC 2X1
TM080695
CIM 300 solution for LC 2X1. One or two pumps can be
connected.
Pos. Description
1 Digital and analog input/output
CIM 300
LC 2X2
1
BACnet
MS/TP
TM080696
CIM 300 solution for LC 2X2. One or two pumps can be
connected.
Pos. Description
1 Digital and analog input/output
1.6.2 BACnet IP, CIM 500
CIM 500 is an add-on communication module that can be installed
in an LC 2XX using a 10-pin connector. This enables
communication with a PLC, SCADA system, etc.
It is possible to control the system over the BACnet IP connection
and read status, measured values, etc.
BACnet
IP
LC 2X1
CIM 500
1
TM080221
CIM 500 solution for LC 2X1. One or two pumps can be
connected.
Pos. Description
1 Digital and analog input/output
CIM 500
LC 2X2
BACnet
IP
1
TM080222
CIM 500 solution for LC 2X2. One or two pumps can be
connected.
Pos. Description
1 Digital and analog input/output
6
English (GB)