9
V6.0
DMX model 226 en
2 Safety Instructions
2.1 Application of the Product
The dosing pump described here is suitable for dosing liquid, non-abrasive and non-
inflammable media strictly complying with the instructions of this manual.
!
WARNING Other applications are not intended and are not
permitted. Grundfos accept no responsibility for
damages caused by unintended use.
NOTE Explosion-proof pumps are indicated on the pump type
identification label as well as on the motor type
identification label. The enclosed declaration of
conformity with the 94/9/EC guideline will replace the
declaration of EC conformity incorporated in this
instructions manual.
!
WARNING For the use of a pump indicated as explosion-proof for
operation in potentially explosive operating places
according to guideline 94/9/EC, please follow the
enclosed instructions "Operating an explosion-proof
pump" in addition to this instructions manual.
2.2 Obligations of the Operating Authority
The operating authority of the plant is responsible for
❏ instructing the operation personnel
❏ arranging regular maintenance
2.3 Averting Dangers
!
WARNING When dosing dangerous media, observe the
corresponding safety precautions!
Wear protective gloves and glasses when executing
work at the dosing head, connections or lines!
Only use the prescribed line types!
Do not open the pump!
Repair only by authorized personnel!
CAUTION Adjust the stroke length only while the pump is
running!
Danger of damages.
To Next Page
Loading...
Need help?
General
