Grundfos MAGNA1 C User Manual

Declaration of conformity
484
Type Key:
DN32-120 F (N), DN40-80 to 180 F (N), DN50-(X)XX F (N),
DN65-(X)XX F (N), DN80-(X)XX F (N), DN100-(X)XX F (N) and DNXX-(X)XX D (F) (N).
– Machinery Directive (2006/42/EC)
Standard used: EN 809:1998 + A1:2009.
– Radio Equipment Directive (2014/53/EU)
Standards used:
EN 60335-1:2012 + AC:2014 + A11:2014 + A13:2017 + A1:2019 + A14:2019 +
A2:2019 + A15:2021, EN 60335-2-51:2003 + A1:2008 + A2:2012, EN 62233:2008.
EN 55014-1:2006 + A1:2009 + A2:2011, EN 55014-1:2017, EN 61000-6-2:2005, EN
61000-3-2:2014, EN 61000-3-3:2013, ETSI EN 301 489-1 V2.2.0, ETSI EN 301 489-17 V3.2.0.
ETSI EN 300 328 V2.1.1
– Ecodesign Directive (2009/125/EC)
Circulators:
– Commission Regulation (EC) No: 641/2009 and Commission Regulation (EU) 622/2012. Applies
only to circulators marked with the energy efficiency index EEI. See the pump nameplate.
Standards used: EN 16297-1:2012, EN 16297-2:2012.
– RoHS Directives (2011/65/EU and 2015/863/EU).
Standards used: EN IEC 63000:2018.
Type Key:
DN25-(X)XX (N), DN32-40 to 100 F (N), DN32-120 (N), DN40-40 to 60 F (N).
– Machinery Directive (2006/42/EC)
Standard used: EN 809:1998 + A1:2009.
– Low Voltage Directive (2014/35/EU).
Standards used:
EN 60335-1:2012 + AC:2014 + A11:2014 + A13:2017 + A1:2019 + A14:2019 +
A2:2019 + A15:2021, EN 60335-2-51:2003 + A1:2008 + A2:2012, EN 62233:2008.
– EMC Directive (20
14/30/EU).
Standards used: EN 55014-1:2006 + A1:2009 + A2:2011, EN 55014-1:2017, EN 61000-6-2:2005,
EN 61000-3-3:2013, EN61000-3-2:2014
– Ecodesign Directive (2009/125/EC).
Circulators:
Commission Regulation (EC) No: 641/2009 and Commission Regulati
on (EU) 622/2012. Applies
only to circulators marked with the energy efficiency index EEI. See the pump nameplate.
Standards used: EN 16297-1:2012, EN 16297-2:2012.
– RoHS Directives (2011/65/EU and 2015/863/EU).
Standards used: EN IEC 63000:2018.
This EC
declaration of conformity is only valid when published as part of Grundfos service kit
instruction (publication number 99363375) or the Grundfos Safety instructions and other important
information (publication number 99210935).
Bjerringbro, 4th February 2022
Joachim Krogshave
Head of Product Development, Commercial Building Services
Grundfos Holding A/S
Poul Due
Jensens Vej 7
8850 Bjerringbro, Denmark
Manufacturer, Person authorised to compile technical file and empowered
to sign the EC/EU declaration of conformity.

Grundfos MAGNA1 C Specifications

General

Liquid temperature range	-10°C to +110°C
Maximum operating pressure	10 bar
Enclosure class	IP42
Insulation class	F
Type	Circulator pump
Pump housing	Cast iron
Series	MAGNA1
Model	MAGNA1 C
Protection Class	IP42
Approvals	CE, EAC
Connection	Flange
Power Supply	1 x 230 V, 50/60 Hz
Weight	Varies by model