English (GB)
10
Handling and storing the product
Make sure that the fuse is
dimensioned according to the
nameplate and local legislation.
Connect all cables in accordance with
local regulations.
Make sure that all cables are
heat-resistant up to 70 °C.
Install all cables in accordance with
EN 60204-1 and EN 50174-2.
WARNING
Electric shock
Minor or moderate personal injury
- Separate wires connected to supply
terminals, outputs NC, C and
start-stop input from each other and
from the supply by means of
reinforced insulation.
Observe local regulations concerning
limits for manual lifting or handling.
To Next Page
Loading...
