Grundfos MAGNA1 C User Manual

English (GB)
9
WARNING
Electric shock
Death or serious personal injury
- Connect the pump to an external
main switch with a minimum contact
gap of 3 mm in all poles.
- Use earthing or neutralisation for
protection against indirect contact.
- For plug-connected versions: In
case of an insulation fault, the fault
current may be a pulsating DC.
Observe national legislation about
requirements for and selection of
Residual Current Device (RCD)
when installing the pump.
For terminal-connected versions:
In case of an insulation fault, the
fault current may be a DC or
pulsating DC. Observe national
legislation about requirements for
and selection of Residual Current
Device (RCD) when installing the
pump.

Grundfos MAGNA1 C Specifications

General

Liquid temperature range	-10°C to +110°C
Maximum operating pressure	10 bar
Enclosure class	IP42
Insulation class	F
Type	Circulator pump
Pump housing	Cast iron
Series	MAGNA1
Model	MAGNA1 C
Protection Class	IP42
Approvals	CE, EAC
Connection	Flange
Power Supply	1 x 230 V, 50/60 Hz
Weight	Varies by model