Declaration of conformity
490
Declaration of conformity
UK declaration of conformity
We, Grundfos, declare under our sole responsibility that the products to which the
declaration below relates, are in conformity with UK regulations, standards and s
pecifications to which conformity is declared, as listed below:
Valid for products:
MAGNA1
Type Key:
DN32-120 F (N), DN40-80 to 180 F (N), DN50-(X)XX F (N), DN65-(X)XX F (N),
DN80-(X)XX F (N), DN100-(X)XX F (N) and DNXX-(X)XX D (F) (N)
• Supply of Machinery (Safety) Regulations 2008
Standards used: EN 809:1998 + A1:2009
• Radio Equipment Regulations 2017
Standards used: EN 60335-1:2012 + AC:2014 + A11:2014 + A13:2017 + A1:2019
+ A14:2019 + A2:2019 + A15:2021, EN 60335-2-51:2003 + A1:2008 + A2:2012, EN
62233:2008.
EN 55014-1:2006 + A1:2009 + A2:2011, EN 55014-1:2017, EN 61000-6-2:2005, EN
61000-3-2:2014, EN 61000-3-3:2013, ETSI EN 301 489-1 V2.2.0, ETSI EN 301 489-17
V3.2.0.
ETSI EN 300 328 V2.1.1
• The Ecodesign for Energy-Related Products and Energy Information
(Amendment) (EU Exit) Regulations 2019
Commission Regulation (EC) No 641/2009
Commission Regulation (EC) No 622/2012
Standards used: EN 16297-1:2012, EN 16297-2:2012
• The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012
Standards used: EN IEC 63000 :2018
Type Key:
DN25-(X)XX (N), DN32-40 to 100 F (N), DN32-120 (N), DN40-40 to 60 F (N)
• Supply of Machinery (Safety) Regulations 2008
Standards used: EN 809:1998 + A1:2009
• Electrical Equipment (Safety) Regulations 2016
Standards used: EN 60335-1:2012 + AC:2014 + A11:2014 + A13:2017 + A1:2019
+ A14:2019 + A2:2019 +A15:2021, EN 60335-2-51:2003 + A1:2008 + A2:2012, EN
62233:2008.
Standards used: EN 16297-1:2012, EN 16297-2:2012.
To Next Page
Loading...
Need help?
General
