English (GB)
23
9.3.3 Menu overview for advanced control panel
1)
Only available if an advanced functional module, type FM 300, is fitted.
Advanced control panel
"Home" MGE Multimotor system
●●
"Status" MGE Multimotor system
""Operating status"" ●●
""Operating mode, from"" ●●
""Control mode"" ●●
""Pump performance"" ●●
""Actual controlled value"" ●●
""Resulting setpoint"" ●●
""Speed"" ●●
""Acc. flow and specific energy"" ●●
""Power and energy consumption"" ●●
""Measured values"" ●●
""Analog input 1"" ●●
""Analog input 2"" ●●
""Analog input 3""
1)
●●
""Pt100/1000 input 1""
1)
●●
""Pt100/1000 input 2""
1)
●●
""Analog output""
1)
●●
""Warning and alarm"" ●●
""Actual warning or alarm"" ●●
""Warning log"" ●●
""Alarm log"" ●●
""Operating log"" ●●
""Operating hours"" ●●
""Fitted modules"" ●●
""Date and time"" ●●
""Product identification"" ●●
""Motor bearing monitoring"" ●●
""Multi-pump system"" ●
""System operating status"" ●
""System performance"" ●
""System input power and energy"" ●
""Pump 1, multi-pump system"" ●
""Pump 2, multi-pump system"" ●
""Pump 3, multi-pump system"" ●
""Pump 4, multi-pump system"" ●
To Next Page
Loading...
