English (GB)
11
3. General description
Grundfos Multilift MOG and MDG lifting stations are supplied
complete with collecting tank, connection accessories,
LC 221 controller and level sensor.
The following gives a description of the components.
Fig. 1 Multilift MOG front and rear view
Fig. 2 Multilift MDG front and rear view
TM05 2125 4411
Pos. Description
1 Pump with grinder system and vortex impeller
2 Lifting bracket
3 Nameplate
4 Venting port, DN 70 (outer diameter, 75 mm), open
5
Screw cap for pressure tube and tank inspection
opening
6 Vertical inlet, DN 150 (seal is accessory)
7 Fixing point
8 Oval flange for connecting the discharge line
9
Side or top inlet, DN 50 (seals are accessory).
Socket for MOG; connecting piece for MDG
10
Collecting tank with carrying handle moulded into
tank body
11
Port for manually operated diaphragm pump, 1 1/2".
Socket with seal for MOG; connecting piece with
flexible connection hose and clamps for MDG
12 Horizontal inlet, DN 100 (seal is accessory)
13
Adjustable inlet disk, DN 100 (DN 150 optional as
accessory)
TM05 2124 4411
To Next Page
Loading...
