English (GB)
23
6.3 Information menu
All status data and fault indications can be seen in the information
menu. The information menu can be seen in all operating modes
(ON-OFF-AUTO). To open the information menu, mark the
symbol using the button and press the button . Navigate
through the menu by means of the buttons and . Select the
desired menu item by pressing the button . See also fig. 16.
In the information menu the following data can be read:
• fault indications
• operating hours
• number of starts
• max. measured motor current.
Fig. 16 Menu structure for information menu
TM0 5 1809 3811
EXIT
EXIT Back to main menu
R_03 Measured max. motor current [A]
3.9
007200
000020
20 faults from 01 to
20
20 F006 …
01 F002
R_02 Impulse counter
R_01 Hour counter
F_01 Fault LOG
Information menu
To Next Page
Loading...
