English (GB)
26
7. Installation of lifting station
7.1 General description
When installing the Multilift MOG or MDG lifting station, make
sure that all local regulations covering venting, access to the
stations, etc., are observed.
7.1.1 Installation sketch
Fig. 18 Installation sketch
TM05 2143 4511
Pos. Accessories Product number
1 Socket seal, DN 100 97726942
2 Socket seal, DN 50 98079669
3 Diaphragm pump, 1 1/2" 96003721
4 PVC isolating valve, DN 100 96615831
5
1 1/2" complete pre-assembled discharge pipework
(see detailed description below)
98085356 (MOG)
98085358 (MDG)
6 Inlet disk with socket seal, DN 150, for replacement 98079681
7 Battery kit with 9.6 V battery and connection part 98079682
To Next Page
Loading...
