Grundfos RSI - Page 119

Code Parameter Min Max Unit Default ID Description
P3.14.2.5 SP 1 Source 0 22 1 1643
0 = Not Used
1 = Keypad Setpoint 1
2 = Keypad Setpoint 2
3 = AI1
4 = AI2
5 = AI3
6 = AI4
7 = AI5
8 = AI6
9 = ProcessDataIn1
10 = ProcessDataIn2
11 = ProcessDataIn3
12 = ProcessDataIn4
13 = ProcessDataIn5
14 = ProcessDataIn6
15 = ProcessDataIn7
16 = ProcessDataIn8
17 = Temperature Input 1
18 = Temperature Input 2
19 = Temperature Input 3
20 = Temperature Input 4
21 = Temperature Input 5
22 = Temperature Input 6
AI's and ProcessDataIn are
handled as percent
(0.00-100.00 %) and scaled
according to Setpoint minimum
and maximum.
Note: ProcessDataIn signals
use 2 decimals.
P3.14.2.6 SP 1 Minimum -200.00 200.00 % 0.00 1644
Minimum value at analogue
signal minimum.
P3.14.2.7 SP 1 Maximum -200.00 200.00 % 100.00 1645
Maximum value at analogue
signal maximum.
P3.14.2.8 SP 2 Source 0 22 0 1646 See P3.14.2.5.
P3.14.2.9 SP 2 Minimum -200.00 200.00 % 0.00 1647
Minimum value at analogue
signal minimum.
P3.14.2.10 SP 2 Maximum -200.00 200.00 % 100.00 1648
Maximum value at analogue
signal maximum.
119
English (GB)