9.4.10 Code 8 (Fault ID 604, System fault)
Cause Remedy
• Phase fault: Voltage of an output phase does not
follow the reference.
• Reset the fault and restart.
• Contact the nearest distributor if the fault reoccurs.
9.4.11 Code 8 (Fault ID 605, System fault)
Cause Remedy
• CPLD has faulted, but there is no detailed
information about the fault.
• Reset the fault and restart.
• Contact the nearest distributor if the fault reoccurs.
9.4.12 Code 8 (Fault ID 606, System fault)
Cause Remedy
• Control panel and power unit software are
incompatible.
• Update software.
• Contact the nearest distributor if the fault reoccurs.
9.4.13 Code 8 (Fault ID 607, System fault)
Cause Remedy
• Software version cannot be read. There is no
software in the power unit.
• Update power unit software.
• Contact the nearest distributor if the fault reoccurs.
9.4.14 Code 8 (Fault ID 608, System fault)
Cause Remedy
• CPU overload. A part of the software (for example
application) causes an overload situation. The
source of the fault is suspended.
• Reset the fault and restart.
• Contact the nearest distributor if the fault reoccurs.
9.4.15 Code 8 (Fault ID 609, System fault)
Cause Remedy
• Memory access has failed. For example, retain
variables could not be restored.
• Reset the fault and restart.
• Contact the nearest distributor if the fault reoccurs.
9.4.16 Code 8 (Fault ID 610, System fault)
Cause Remedy
• Necessary device properties cannot be read. • Reset the fault and restart.
• Contact the nearest distributor if the fault reoccurs.
9.4.17 Code 8 (Fault ID 614, System fault)
Cause Remedy
• Configuration error. • Reset the fault and restart.
• Contact the nearest distributor if the fault reoccurs.
9.4.18 Code 8 (Fault ID 647, System fault)
Cause Remedy
• Software error. • Update software.
• Contact the nearest distributor if the fault reoccurs.
170
English (GB)
To Next Page
Loading...
