Grundfos RSI - Page 78

Code Parameter Min Max Unit Default ID Description
P3.1.4.12.2 I/f start frequency 0.0 P3.1.1.2 % 15.0 535
Output frequency limit below which the
defined I/f start current is fed to motor.
P3.1.4.12.3 I/f start current 0.0 100.0 % 80.0 536
The current fed to the motor when the I/f
start function is activated.
Group 3.1.4.13: Stabilators
Code Parameter Min Max Unit Default ID Description
P3.1.4.13.1 TorqStabGain 0.0 500.0 % 50.0 1412
Gain of the torque stabilator in
open loop motor control
operation.
P3.1.4.13.2 TorqStabGainFWP 0.0 500.0 % 50.0 1414
Gain of the torque stabilator at
field weakening point in open
loop motor control operation.
P3.1.4.13.3 TorqStabDampTC 0.0005 1.0000 s 0.0050 1413
Damping time of torque
stabilizer
P3.1.4.13.4 TorqStabDampTC PMM 0.0005 1.0000 s 0.0500 1735
Damping time constant of
torque stabilizer for PM-motor.
78
English (GB)