Grundfos SmartFlo - Disabling the Hand On Mode from the Keypad

8. Disabling the "Hand on" mode from the keypad
1. Press the [Main Menu] button twice to go to the beginning of the main menu.
2. Press OK on the highlighted "0-** Operation/Display" menu.
3. Press the [Down] button until "0-4* LCD Keypad" is highlighted, and press OK.
4. Press OK on the selected "0-40 (Hand on) Key on LCP" menu, and press the [Down] button to select "Disabled".
Selecting "Hand on" will cause the motor to operate at uncontrolled maximum speed.
1(1)
0-40 [Hand on] Key on LCP
[0] Disabled
LCP Keypad
67.1 psi 60.0 psi
0-4
([1] Enabled)
TM081126
Disabling "Hand on"
14
English (US)