Grundfos UPE Series - Page 18

English (GB)
18
8.2.2 Setting of pump head
The desired pump head is set by pressing or .
The light fields on the control panel will indicate the
head set.
The scaling is set to be approx. 1.2 metres per light
field.
The table below shows examples of pump head
settings indicated by the light fields.
Constant-pressure control Proportional-pressure control
UPE 100-120 FZ
UPE(D) 80-120 FZ
TM04 5871 4209 TM04 5870 4209
Light fields 5 and 6 are
activated, indicating a desired
head of approx. 6.5 metres.
Light fields 5 and 6 are
activated, indicating a desired
head of approx. 6.5 metres.
H m
Q
0
12
H m
QQ
0
12