- 31 - DSI 400
7 firmware uPdate via usb stiCk
—> Therefore no PC is needed!
• Switch off the DSI 400.
• Unzip the .zip file containing the new firmware and copy both files (idl4k.
bin and idl4k.scr) to an USB stick (Root directory).
—> The stick must be formatted in the "FAT32" file system.
• Insert the USB stick into the upper USB socket of the DSI 400.
• Switch on the DSI 400.
—> The firmware will be updated automatically.
You will see a "running light" on the LEDs @. At the end of the
update all LEDs will switch on and then off. Then the box will start
normally.
8 faCtor y reset
• Export an existing favourite list. The favourite list will be deleted during fac-
tory reset.
• Press the reset button 5 on the rear panel while you power up the DSI 400
and keep it pressed for 10 seconds 9.
—> After that the DSI 400 must be configured again and if necessary a
new favourite list must be set/imported.
Updates of the main TV list (Hauptliste TV) must be loaded again.
To Next Page
Loading...
