- 32 - DSI 400
9 log in Client devises to the dsi 400
If you start operating a client device and establish a connection to the DSI 400,
always the first client will be assigned to tuner/channel 1 (LED 1 @ lights), the
second client to tuner/channel 2 (LED 2 @ light) etc.
Therefore also observe the "Hints for antenna configuration" on page 20.
9.1 ios and android smartPhones/tablets
Via the iTunes Store (for iPhone/iPad) or the Google Play Store (for Android)
the "Elgato Sat>IP" App can be purchased.
This App was especially designed for the operation at SAT-to-IP routers and
work like a traditional satellite receiver. Features like channel search, EPG or
PVR (inclusively time shift) are available.
• Install the "Elgato Sat>IP" App on your Smartphone/Tablet
• Start the App.
—> The App automatically recognizes the DSI 400 and establishes a
connection.
Herein you can receive all unscrambled SD programmes which are present at
the Sat inputs after a programme search is done.
—> Herein tuner preassignment is not possible, as there is no access to
the DLNA list
To Next Page
Loading...
