To Next Page

To Previous Page

Model 2606A/2606A-B operations manual

horizontal surface may cause the charger to slightly reduce amperage output due to

the thermal protection built in. Do not install the charger on carpeted, upholstered, or

 varnishedsurfaces.

2. Locate charger as far away from battery as dc cables permit.

3.Neverplacechargerdirectlyabovebatterybeingcharged;gasesfrombatterywill 

corrode and damage charger.

4.Neverallowbatteryacidtodriponchargerwhenreadingelectrolytespecificgravityor 

filling battery.

5.Donotoperatechargerinaclosed-inareaorrestrictventilationinanyway.

6. Do not set a battery on top of charger.

DC CONNECTION PRECAUTIONS

1.Connectanddisconnectdcoutputsonlyafterremovingaccordfromelectricoutlet. 

 Neverallowthealligatorclipconnectortotoucheachother

2.Checkpolarityofthebatteryposts.ThePOSITIVE(POS.,P,+)batterypostusuallyhas

 alargerdiameterthantheNEGATIVE(NEG.,N,-)post.ConnectRedchargeroutput 

 wiretoPOSITIVEpost,BlackchargerwiretoNEGATIVE.

3. Do not face the battery when making the final connection.

Guest 2606A Operation Manual

Other manuals for Guest 2606A