Guldmann GH3 Series

To Next Page

To Previous Page

Menu Start

Scale

ExitZero

Scale KG

248.0

ExitZero

Scale KG

0.0

Resetting the unit (tara)

1. Press any key on the hand control to activate the hoist.

When the lifting module is activated, a display on the hand control is

switched on and the Guldmann logo “G” appears.

2. Select “Menu” using the function key located immediately below the

display

3. Then select until the “Scale” menu appears in the display.

4. Then select “Start”.

5. When the lifting hanger with the lifting sling is at rest, select “Zero”

to reset the GH3 scale module.

The scale module has now been reset and weighing can commence.

Guldmann GH3 Series - Page 20