Guldmann GH3 Series - Installation of GH3 Cross Lifting Hanger and Horizontal Lifter

44 pages

To Next Page

To Previous Page

Fig. 1

Fig. 2

1.08 Installation of GH3 Cross hanger and Horizontal lifter

Lifting hangers from other manufacturers

Guldmann shall not be liable for faults or accidents that may occur as a result

of using lifting hangers made by other manufacturers.

If there is any doubt about the selection or use of a lifting hanger,

please contact your supplier.

The lifting hanger can be installed to the lifting strap without the use of any

tools.

Installation of GH3 Cross

lifting hanger

1. Start with the installation of the GH3 lifting

beam. Place each of the lifting straps oval

hook in the eye of the GH3 lifting beam,

one on each side (Fig. 1 and 2).

Important:

Check that none of the lifting straps

are twisted after the installation of the

lifting beam!

Related product manuals