GW Instek GDS-1072A-U - Selecting the Waveform Update Mode

CONFIGURATION
85
Selecting the waveform update mode
Background
The display update mode is switched
automatically or manually according to the
horizontal scale.
Main mode
Updates the whole displayed waveform at once.
The main mode is automatically selected when the
horizontal scale (timebase) is fast.
Horizontal scale
≤100ms/div
Trigger
All modes available
Roll mode
Updates and moves the waveform gradually from
the right side of the display to the left. The Roll
mode is automatically selected when the
horizontal scale (timebase) is 50ms or slower.
When in the Roll mode, an indicator appears at the
bottom of the display. When in roll mode the
record length is 2M (1 channel) or 1M (2 channel).
Main mode
Roll mode
Timebase
≥50ms/div (≤1.25MS/s)
Trigger
Auto mode only
Selecting the Roll
mode manually
1. Press the Horizontal menu
key.
MENU
2. Press Roll. The horizontal
scale automatically becomes
50ms/div and the
waveform starts scrolling
from the right side of the
display (If the oscilloscope
is already in the Roll mode,
there will be no change).
Roll