GW Instek GPT-9800 - Automatic Test Results

GPT-9000 Series User Manual
92
Exit Testing
To exit testing, press the
MANU/AUTO key when the
tester is in the READY status. The
tester will revert to the VIEW
status for the current automatic
test.
MANU/AUTO
I R G B A CW D CW
E
F R E Q = 0 H z 6
0 100
k V
RA C = F FO
EIV
MT I E = 0 0 1 . 0 SR
0 0 m AER F =# 0 .0
1 . 0 0 m AIH ES = 0T
0 0 . 1 S0A M P =R
W
MA U OT N A_0A U T O = 0 0 1 - 1 0
m A
Automatic Test Results
Background
If all the test steps are allowed to run to
completion (the AUTO test is not stopped or a
protection setting is not tripped) then the tester
will judge each step as either PASS or FAIL.
This is shown as a table after the automatic test
has finished running.
Overview
P A S
P A S
S
S
P A S
S K I
S
P
E MA U OT N A_ 1A U T O = 0 0 1 - 0 0
# 0 1 : # 0 2 : # 0 3 : # 0 4 : P A S
# 0 5 : # 0 6 : # 0 7 : # 0 8 : S T O
# 0 9 : # 1 0 : # 1 1 : # 1 2 :
# 1 3 : # 1 4 : # 1 5 : # 1 6 :
S
P
F A I
F A I
L
L
FAIL judgmentPASS judgment
skipped step step stopped
Note
The PASS/FAIL judgment for an automatic test
depends on the results of all the steps (manual
tests) that compose the automatic test:
 Each step must be passed for a PASS judgment
(excluding skipped tests).
 A FAIL result for a single step will result in
FAIL for the whole automatic test.