GW Instek PEL-2002 - Page 147

OPERATION
147
Previous Menu
9. Press F5 (Previous Menu) to
return to the Sequence menu.
Turn Program
On/Off
10. Press F1 (Prog) to turn On or Off
the current Program.
Pressing F1 will cycle from
Program On to Off.
Prog
Off
Prog
On
11. PROG will appear on the
mainframe status panel when
the program is turned on.
Run Program
12. Press the load key on the
mainframe to start the Program.
ON /
OFF
LOAD
13. The Run Program screen
appears.
Start
03/02/09
10 : 30
ConfigureNextStop